On Sale! Fluke Networks LinkRunner & MicroScanner Test Kit – AAATesters.com

Click for Product Info and Updated Pricing

Fluke Networks LinkRunner & MicroScanner  Cable Verifers/Scanners

SKU: 1H132

Fluke Networks LinkRunner – Network Multimeter & WireMap Identifier Set
&
Fluke Microtest MICROSCANNER 10/100 Wire Map Cable Verifier

Fluke Networks LinkRunner MicroScanner Link-Runner Micro-Scanner Network Tester Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Fluke Networks LinkRunner Network Multimeter

At a Glance :
– Link : Determine whether the drop is active, identify its speed, duplex capabilities and service type-10/100/1000 Mbps.
– Ping : Verify connectivity to key devices.
– Cable verification : Multiple tests help you quickly determine if cable is the problem.
– Cable identification : Document unmarked segments, saving you hours of troubleshooting time.
– Improved efficiency : Speed up the escalation process by identifying physical or link layer problems

Product Capabilities :
– An essential, personal tool to quickly verify network connectivity and availability.
– As networks run faster and become more complex, infrastructure cabling and devices must operate to precise levels in a tighter performance window.
– As a result, nearly 80% of network problems stem from simple wiring and connection problems.
– Front-line technicians are the first line of defense against problems in the physical and link layers of the network.
– LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC.

Fluke Microtest MicroScanner 10/100 Cable Verifier

Product Capabilities
“The essential all-in-one network tester”
The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.

The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.

Fluke Networks LinkRunner & MicroScanner

Specifications:

Power Source
– Battery: 9-Volt alkaline battery
– Low battery: Low battery indication on display

Environmental
– Operating Temperature: 0° to 50° C (32° to 122° F)
– Storage Temperature: -10° to 55° C (14° to 131° F)
– Humidity: 10 to 90% non-condensing User Interface
– Display: Custom LCD, 1.75” x .85”
– Keypad: 4 button keypad
Applications
– Shielded and Unshielded Twisted Pair cable
Test Interface
– Main: Modular 8 connector for length, wire map, office identifier, toner
– Loopback: Modular 8 connector used for patch cable wire map
Length
– Measures length on all 4 pairs and displays in feet or meters Checks for opens, shorts and connections to a HUB (10BaseT / Token Ring)
– Maximum length: 1500 ft. (457m)
– Resolution: 1 ft.

Length Calibration
– Modes:
– User Selectable NVP
– NVP Calculation based on known cable length:
-Minimum length: 50 ft. (15 m)
-Maximum length: 1500 ft. (457m)

Wiremap
– Wiremap checks end-to-end continuity on all four wire pairs (Wiremap adapter required)

Faults detected:
– Opens
– Shorts
– Reversed pairs
– Swapped pairs
– Split pairs
– Distance Maximum length: 656 ft. (200 m)

Office Identifier
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs

– 12 passive test plugs attached to far end (identified as 1 through 12)
– Requires minimum 12/36 or 36/45 pairs in cable
– Distance Maximum length: 656 ft. (200 m)

Toner
Generate audible frequency tones detectable by standard tracer probes

– Frequency: User may select 1 of 4 predefined tone sequences
– Interface: Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MICROSCANNER during trace operations.

High Voltage Input/Protection:
– The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone keysets.

LinkRunner & MicroScanner

Includes:
– Fluke Networks LinkRunner Network Multimeter
– Fluke Microtest MicroScanner 10/100 Cable Verifier
– Fluke Networks Intellitone Pro 100 Probe
– Fluke Networks TS19 Butt Set
– Fluke Networks LinkRunner WireMap
– (6) RJ45 To Male Coax Cable Identifiers
– (2) RJ45 to Female Coax Cable Identifier
– Microscanner WireMap Adapter
– (2) Cat6 Patch Cables
– User Manual On CD-ROM
– Carrying Case

Buy, Sell, New, Used Fluke Networks LinkRunner & MicroScanner

Fluke Networks LinkRunner & MicroScanner Spec Sheet