On Sale! Fluke Networks MicroMapper LAN Wiremap Checker – AAATesters.com

Click for Product Info and Updated Pricing

Fluke Networks MicroMapper Cable Verifiers/Scanners

SKU: 1H201

Fluke Networks MicroMapper w/ Remote

Tests for wiring faults and detects opens, shorts, crossed, reversed, and split pairs.

Includes Hard Carrying Case & Accessories As Listed

Fluke Networks MicroMapper Micro-Mapper LAN WireMap Checker Models On Sale War

Fluke Networks Wiremapper
The MICROMAPPER is a hand-held cable tester that enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. In one step, the MICROMAPPER will test twisted pair cabling for opens, shorts, reversed, crossed, and split pairs. Simply slide the switch to the Cable position, press the (TEST) button and the MICROMAPPER will automatically scan for any existing faults in your cable. The specially designed remote unit is provided for one-person testing of installed cabling. The tone generator function can be used with the MicroProbe cable tracer to trace cables and locate cables hidden in ceilings, walls, floors, and bundles.

Fluke Networks MicroMapper

Features:
– Tests for wiring faults and detects opens, shorts, crossed, reversed, and split pairs. (Split pair fault detection requires a minimum cable length of 15.75″ (40cm))
– Verifies shield integrity
– MICROMAPPER’s Remote Identifier enables one person to test installed cabling
– Easy to read fault display and high speed testing
– Generation of two tones for tracing cables and locating hidden cables
– Debug-mode for detailed fault identification results
– Auto-sleep mode to decrease power consumption

Specifications:

Connectors
MICROMAPPER main unit: RJ45 jack
Remote Identifier: RJ 45 jack
Pairs tested 1-2, 3-6, 4-5, 7-8, and shield
LED Display
Horizontal: 5 green LEDs for pairs and shield display
(1 – 2, 3 – 6, 4 – 5, 7 – 8, and SHIELD)
Vertical: 6 red LEDs
(TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY)
Cables test limit
Minimum: 15.75″ (40cm); Maximum: 656’ (200 m)
Power
MICROMAPPER: requires four 1.5 AAA batteries. IEC :
LR03; Others : AAA, E92, 4003; JIS : AM 4 ; ANSI : 24A; 1.5 Volt (nominal)
Remote Identifier: No battery required
Dimensions
MICROMAPPER: 4.92″ x 2.05″ x 1.54″ 1
125 mm x 52 mm x 39 mm
Weight
MICROMAPPER with Remote Identifier: 125 g

MicroMapper

Condition: Refurbished
Warranty: 90 Day Exchange

Included
Fluke Networks MicroMapper (BC# 12750)
Fluke Networks Remote
Hard Copy User Manual
Hard Carrying Case

Buy, Sell, New, Used, Fluke Networks MicroMapper

Fluke Networks MicroMapper Spec Sheet